MFM Ridge Seal Hip & Ridge Tape

MFM Ridge Seal Hip & Ridge Tape is a 35-millimeter self-adhering, waterproofing membrane composed of a layer of modified asphalt adhesive with a durable, gray polymer surface that provides a water barrier underneath the first layer of concrete, clay, and synthetic hip and ridge tiles. The gray polymer is also highly flexible, easy to apply to irregular surfaces, and resistant to punctures and ultraviolet exposure for up to 180 days. This membrane must be covered within 180 days of application. Ridge seal will seal around nails for extra protection against weather and insects. It is recommended that this membrane is applied at temperatures higher than 50 degrees Fahrenheit and onto clean, smooth, and dry surfaces. Ridge seal is not compatible with an EPDM rubber surface. When applying the MFM ridge seal, make sure to remove the release liner. For the best adhesion, the ridge seal can be applied by rolling the entire surface with a hand roller while focusing attention on seams and edges. MFM backs Ridge Seal Hip & Ridge Tape with a 5-year limited warranty.

To properly install your flashing tape, follow our guide.